- Ball-inflating needle for footballs, basketballs and more
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.
Easily adapts schrader only air compressors, floor pumps, and mini pumps to work with presta valves
Giant's Control Blast 16-gram Threaded CO2 Cartridges are the replacement cartridges for Giant's Control Blast and other inflators that accept this type (CO2 inflators sold separately). • Foam-padded cartridge provides insulation
$11.99 - $16.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - MTB 50 mL: Repairs and inflates low-volume MTB tires in less than a minute. - MTB Magnum 75 mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
Problem Solvers 90 degree Presta valve inflator is used to inflate disc wheels, thanks to its narrow, low-profile head. • Presta valve • 90 degree inflator works with most pump heads
Portland Design Works' Shiny Object is made from aluminum for strength and low weight so you won't think twice about bringing this ride essential along with you. A control knob keeps you in charge of the pressure, it takes threaded Co2 cartridges (sold separately) and it fits both Presta and Schrader valves. - Inflator only height: 44 mm (1.75") - Inflator only weight: 40 g (1.5 oz)
Giant's Control Blast 1 CO2 Inflation Kit consists of an inflator head that fits Presta valves, a cartridge sleeve, and a 16-gram CO2 threaded cartridge. It also accepts 12-, 16-, 20- and 25-gram threaded CO2 cartridges. The head features controllable air release so you can fine-tune your pressure.
Giant's Control Blast 2 CO2 Inflation Kit consists of an inflator head that fits Presta valves and a 16-gram threaded CO2 cartridge. It also accepts 12-, 16-, 20- and 25-gram threaded CO2 cartridges. The head features controllable air release so you can fine-tune your pressure.
Inflating up to 120psi and handling both Presta and Schrader valves, Control Tower 4 is constructed with a reinforced composite barrel and plastic base. With an ergonomic handle it comes fully loaded with a ball needle and inflator for a practical, multi purpose pump. - DoubleHead valve - Ball inflator accessories included - Plastic barrel and base - Durable steel shaft
Get back on the road fast with Control Blast 0. Featuring a reversible head for Presta & Schrader with a valve knob which unwinds to apply just the right amount of pressure. Features - Easy fill rate control knob - Threaded Presta and Schrader valve compatible system - Alloy construction - Head only (cartridge not included) - Compatible with threaded cartridges
Lezyne's easy-to-use Alloy Drive CO2 is super compact and portable. Its simple twist operation lets you control exactly how much CO2 you're putting into your tires. Plus, its aluminum construction is lightweight, durable and easy on the eyes. What's more, the Alloy Drive is Presta/Schrader compatible, comes with an anti-freeze sleeve, and works with 16g threaded cartridges. - CNC machined aluminum dispenser with brass internals - CNC control knob twists for easy and controlled inflation - Twin Slip Chuck head presses on to Presta and Schrader valves - Neoprene sleeve insulates hand from cold during discharge - Compatible with threaded CO2 cartridges - Comes with one 16g cartridge
Giant's Control Mini Road Pump boasts a lightweight, durable telescoping aluminum barrel that inflates high-pressure road tires quickly. It has a thumb-lock head that works on all valve types and can inflate up to 120 psi.
Can you tell the difference between 15psi and 17psi? No you can't. We can't either, but Blakburn's digital gauge can. Today's wider, lower pressure tires are more pressure-critical than back when we just used to put as much pressure in as the pump could stand. It's not about fending off flats these days, it's about grip. And the difference between too much and not enough can be as little as a couple of pounds of pressure. The days of "giving it a squeeze" are over. - Swivel/Dual Head - Backlit Display - Accurate within 1% of pressure - Rated from 1-150 PSI - Key Chain Loop - 0.30lbs
- Thumb control keeps thumb safe from cold air - Ergonomic design ensures accurate valve pressure - Simple push-on feature activates air cartridge - Includes 1, 16g threaded co2 cartridge - Presta and schrader valve compatible system - Compatible with threaded and non-threaded cartridges
- Thumb control keeps thumb safe from cold air - Ergonomic design ensures accurate valve pressure - Simple push-on feature activates air cartridge - Includes 1, 16g threaded CO2 cartridge - Presta and Schrader valve compatible system - Compatible with threaded and non-threaded cartridges
Giant's Control Mini MTB Pump boasts a lightweight, durable telescoping aluminum barrel that inflates even the widest mountain bike tires quickly. It has a thumb-lock head that works on all valve types and inflates up to 90 psi.
The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.
Giant's Control Blast 16 gram Threaded CO2 Cartridges are the replacement cartridges for Giant's Control Blast and other inflators that accept this type (CO2 inflators sold separately). • Foam padded cartridge provides insulation
- 1.25" gauge - Pinch-Free T-handle - Reversible head for Presta or Schrader - 120 PSI Max
Giant's Control Mini CO2 Pump boasts a lightweight aluminum barrel that doubles as a micro-sized pump and CO2 inflator. It holds two CO2 cartridges when attached to your bike with the mount, handles all valve types, and pumps up to 120psi into your tires.
Giant's Control Mini MTB+ Pump boasts a lightweight, durable CNC-machined aluminum barrel that's a large diameter so that it can pump up even the widest mountain bike tires quickly. Plus, this mighty mini features a hose that makes pumping easier, hides inside for a clean look, and works on all valve types.
Giant's Control Mini Pocket Pump fits so easily into your jersey pocket that you're liable to forget it's there; that is, until you need it. Then you have 120psi at your fingertips with a reversible head that fits any type of valve. This pump has an aluminum body that telescopes into itself for a compact fit so it can travel with you on every bike ride.
Giant's Control Mini Road+ Pump boasts a lightweight, durable CNC-machined aluminum barrel made to pump up high-pressure road bike tires quickly. Plus, this mighty mini features a hose for easy, confident inflation which hides inside for a clean look and works on all valve types.
- CNC machined aluminum barrel provides a strong, durable body with best-in-class design - Extendable hose with threaded valve help user pump easily and confidently - Roller system valve head eliminates the need to twist the pump as user threads onto the valve - 160psi rating
$41.99 - $45.00
LESS IS MORE. The Giant Control Tower 2 is a great pump choice. A durable structure provides stability during use, remove the surplus function provides better efficiency with fewer strokes to fill your tires. The proven AutoHead is compatible with most common tire valves and the large 3-inch gauge makes it easy to read up to 180psi. - Easy-to-read 3.0" base mounted analog gauge - Comfortable handle with solid steel barrel design - AutoHead design - 180psi rating
Easy to use, powerful, durable and economical, Park Tool's PFP-8 Home Mechanic's Floor Pump has a place in every garage and home bike shop and is perfect to take along to cycling events, too! It inflates like a champ thanks to its sturdy steel barrel, tough handle, composite thumblock head that fits Presta and Schrader valves, sturdy steel base, long hose and extra-large, easy-to-read gauge.
Giant's Shadow Repair Wallet lets you bring along your ID, some cash, a credit card and all the stuff you need to fix a flat in a compact, weather-resistant wallet. It includes a Control Blast inflator, a 16g CO2 cartridge, a patch kit, and tire levers. Slip it in your jersey pocket and go.
Page 1 of 2 Next page