Filter By:
- Parts & Accessories (53)
- Wheels (30)
- Hubs (17)
- Rims (1)
- Spokes (1)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Wheels
$0.99
$1.99
- For square taper and flanged.
- Fits most cartridge BBs
- Shell: 8mm Flanged axle bolt
$2.00
Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.
$2.99
The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.
$3.50 - $8.99
Replacement indicator chain for three speed Sturmey Archer hubs.
$4.99
Replacement parts for Micro C-Drive Hubs.
- Supplier Part: Replacement #16 Clutch Ring
$4.99
Replacement parts for Micro C-Drive Hubs.
- Supplier Part: Replacement #20 Cone Drive
$4.99
Replace the loop that goes around your left chainstay to secure your coaster brake arm with this Sunlite replacement part. It's made of full stainless steel, and it includes a nylock nut, washer, and bolt.
$5.99
- Flanged 15mm axle nuts
- Durable chromoly construction
- Spacing / Axle: B/O
$6.50
- Strong nylon reinforced PVC for a secure fit
- Handles high-pressures; does not rot
- 0.5mm thick
$6.99
- Flanged 15mm axle nuts
- Durable chromoly construction
- Spacing / Axle: B/O
$7.49 - $22.99
Replacement axles for MX-2000 hubs.
Size: 14 x 100 x 165mm
- Supplier Part: KT-M18F
- MPN: 370666
- Front/Rear: Front
- Diameter: 14mm
- OLD: 100mm
Size: 14 x 110 x 180mm
- Supplier Part: KT-389R
- MPN: 370668
- Front/Rear: Rear
- Diameter: 14mm
- OLD: 110mm
Size: 3/8-inch x 100 x 165mm
- Supplier Part: KT-M17F
- MPN: 370667
- Front/Rear: Front
- Diameter: 3/8-inch
- OLD: 100mm
Size: 3/8-inch x 110 x 180mm
- Supplier Part: KT-M88R
- MPN: 370682
- Front/Rear: Rear
- Diameter: 14mm slotted for 3/8-inch
- OLD: 110mm
$7.69
Origin-8's Track Cog Lock Ring with left-handed threading and 1.29 x 24tpi in a chrome finish completes your basic track cog locking needs.
$7.99
- Plastic spoke covers in a variety of colors
- 300mm cut to fit length
- 36 pieces - enough for one wheel
- Increases visibility and demands attention
$8.99
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity
$12.75
- Strong nylon reinforced material handles high-pressures
- Adhesive backed for a secure fit
- Does not rot
- 0.5mm thick
$13.99 - $14.49
Replacement axles for Black Ops MX-1100 hubs.
Size: 3/8-inch x 100 x 140mm
- Supplier Part: KT-576F
- MPN: 370664
- Front/Rear: Front
- Diameter: 3/8-inch
- OLD: 100mm
Size: 3/8-inch x 110 x 152mm
- Supplier Part: KT-5V3R
- MPN: 370665
- Front/Rear: Rear
- Diameter: 3/8-inch
- OLD: 110mm
$14.49 - $30.99
Replacement axles for Black Ops MT-3100 hubs. Bearing shoulder to bearing shoulder is 59mm.
Size: 3/8-inch x 100 x 140mm
- Supplier Part: KT-M37F
- MPN: 370685
- Front/Rear: Front
- Diameter: 3/8-inch
- OLD: 100mm
Size: 3/8-inch x 110 x 175mm
- Supplier Part: KT-M98R
- MPN: 370686
- Front/Rear: Rear
- Diameter: 3/8-inch
- OLD: 110mm
$14.99 - $18.99
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims.
21mm width fits:
- ZTR Olympic
- ZTR Iron Cross
- ZTR 355
- ZTR Alpine
- ZTR Crest
- ZTR Alpha 340 (2 layers)
- ZTR Alpha 400 (2 layers)
- Most road clincher rims
25mm width fits:
- ZTR 355 (26", 650b, 29")
- ZTR Crest
- Crest MK3
- ZTR Arch EX
- ZTR Flow EX
- Crest S1
27mm width fits:
- ZTR Flow EX
- ZTR Bravo
- ZTR Hugo 52mm
- Arch S1
- ZTR Rapid 28
- ZTR Rapid 30
- Arch MK3
30mm width fits:
- ZTR Flow MK3
$15.99
Origin-8's Torq Lite Track Cog Lock Ring 1.29" x 24 tpi with left-handed threaded thread is the only lock ring you need. Hardened threading and extra material make this highly durable to help you go the distance.
$16.00
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant.
Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads:
- MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi
- ERD 615, 622x49.9, 29 in x 52.3mm
Your rim has a stepped valve and is not compatible with this Schrader valve.
$20.99
Replacement axle for Black Ops MX-2050 hubs.
Size: 3/8-inch x 110 x 175mm
- Supplier Part: KT-AB9R
- MPN: 370683
- Front/Rear: Rear
- Diameter: 3/8-inch
- OLD: 110mm
$21.99
DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups.
- Highly resistant adhesive tape works as a rim tape and airseal
Page 1 of 4
Next page