Parts & Accessories
- Converts Schrader rims to Presta - Rubber - Sold individually
- For square taper and flanged. - Fits most cartridge BBs - Shell: 8mm Flanged axle bolt
- Shell: 8mm flanged axle nut - Flanged
Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.
$2.49 - $2.50
The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.
Replacement indicator chain for three speed Sturmey Archer hubs.
- Flanged 15mm axle nuts - Durable chromoly construction - Spacing / Axle: B/O
Replace the loop that goes around your left chainstay to secure your coaster brake arm with this Sunlite replacement part. It's made of full stainless steel, and it includes a nylock nut, washer, and bolt.
- Eady to install - Spoke mounted - 2 per set
- Strong nylon reinforced PVC for a secure fit - Handles high-pressures; does not rot - 0.5mm thick
Replacement parts for Micro C-Drive Hubs. - Supplier Part: Replacement #16 Clutch Ring
Replacement parts for Micro C-Drive Hubs. - Supplier Part: Replacement #20 Cone Drive
Origin-8's Track Cog Lock Ring with left-handed threading and 1.29 x 24tpi in a chrome finish completes your basic track cog locking needs.
$7.39 - $20.99
Replacement axles for MX-2000 hubs. Size: 14 x 100 x 165mm - Supplier Part: KT-M18F - MPN: 370666 - Front/Rear: Front - Diameter: 14mm - OLD: 100mm Size: 14 x 110 x 180mm - Supplier Part: KT-389R - MPN: 370668 - Front/Rear: Rear - Diameter: 14mm - OLD: 110mm Size: 3/8-inch x 100 x 165mm - Supplier Part: KT-M17F - MPN: 370667 - Front/Rear: Front - Diameter: 3/8-inch - OLD: 100mm Size: 3/8-inch x 110 x 180mm - Supplier Part: KT-M88R - MPN: 370682 - Front/Rear: Rear - Diameter: 14mm slotted for 3/8-inch - OLD: 110mm
Small component with a large impact. A poorly constructed or unsuitable tyre rim tape can be the cause of many punctures. It is especially important with hollow section rims to use a pressure-resistant rim band which covers the entire rim. The fabric-reinforced Continental Easy Tape rim protector is designed for use under high air pressure conditions. The various widths enable a perfect fit for all standard rims. The high pressure design for racing cyclists withstands up to 220 psi, without becoming deformed. The flat construction type also significantly eases the job of tyre fitting.
• Replacement steel quick release skewers
- Plastic spoke covers in a variety of colors - 300mm cut to fit length - 36 pieces - enough for one wheel - Increases visibility and demands attention
$13.59 - $14.19
Replacement axles for Black Ops MX-1100 hubs. Size: 3/8-inch x 100 x 140mm - Supplier Part: KT-576F - MPN: 370664 - Front/Rear: Front - Diameter: 3/8-inch - OLD: 100mm Size: 3/8-inch x 110 x 152mm - Supplier Part: KT-5V3R - MPN: 370665 - Front/Rear: Rear - Diameter: 3/8-inch - OLD: 110mm
$14.19 - $30.79
Replacement axles for Black Ops MT-3100 hubs. Bearing shoulder to bearing shoulder is 59mm. Size: 3/8-inch x 100 x 140mm - Supplier Part: KT-M37F - MPN: 370685 - Front/Rear: Front - Diameter: 3/8-inch - OLD: 100mm Size: 3/8-inch x 110 x 175mm - Supplier Part: KT-M98R - MPN: 370686 - Front/Rear: Rear - Diameter: 3/8-inch - OLD: 110mm
- Extra security against theft - 5mm hex CrMo axle
$14.99 - $15.99
Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3
WTB's TCS Brass Valves are your key to the excellence that is tubeless wheels and tires. A stepped lock nut adds compatibility among various rim drillings, a smooth pump interface makes adding air easy, and a removable core makes setting beads and injecting sealant a cinch.
Stan's 3.30/3.30Ti Hub Kit converts Stan's 3.30 front hubs from quick-release to through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on. Conversion kits available in 12mm and 15mm.
Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.
- Front/Rear: Rear - OLD: 175mm
Wheels Manufacturing Axle Spacers help you dial in your hub spacing to ensure correct fit and side-to-side spacing in the rear triangle without having to alter the wheel's dish. - Spacers come in bags of 20
Replacement axle for Black Ops MX-2050 hubs. Size: 3/8-inch x 110 x 175mm - Supplier Part: KT-AB9R - MPN: 370683 - Front/Rear: Rear - Diameter: 3/8-inch - OLD: 110mm
Features - Strong nylon reinforced material handles high-pressures - Adhesive backed for a secure fit - Does not rot - 0.5mm thick
Stan's All Mountain 29er Rim Strip converts standard tubed wheels to tubeless so you can reap the benefits. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping". Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Page 1 of 2 Next page