Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Other

$9.99
- Prevents chain derailment when shifting to inner ring
- Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes

$39.99
- KlickFix bracket for use with all Basil handlebar bags requiring a KlickFix adapter
- Easily & quickly removable
- Suitable for handlebars measuring 22mm to 31.8mm
- Made form composite materials
- Adjustable angle

$4.99
- Soft foam grip donuts prevent thumb blisters from riding gloveless
- Intended for use with flanged BMX grips to prevent rubbing and irritation

$6.99
- Allows the use of two separate cables running from detangler to brake for more precise adjustment and better feel
- Attaches to rear cable guide and routes two cables around seat post

$8.49
- Economy level forged alloy seat post clamps for BMX and cruiser bikes with 1" / 25.4mm seat posts
- Clamp Size: 25.4mm
- Material: Alloy

$8.49
- Cable hanger and straddle cable
- Alloy construction
- Anodized finish
- Great for Canti and U-Brakes

$9.99
- Axle washers for use with 19mm bottom brackets
- 19.1x26x2.0mm
- Interface: 19mm
- Sold in a 10-pack

$11.99
- Alloy top cap with hollow bolt to allow for brake cable pass-through
- ED black durable finish
- Size: 1-1/8"

$39.99
- Aluminum cups w/ steel hardware
- Converts a non-threaded 68mm American BB shell to use an English-threaded Euro BB
- Shell: 68mm
- Interface: American
- Spindle Type: Euro
- Cup Material: Alloy
- Weight: 104g

$16.99
These bar end adapters are required if you wish to add clamp-style bar ends to your Bontrager Satellite Plus Isozone handlebars.
- Required for bar end use on Satellite Plus Isozone bars
- For use with clamp style bar ends
- Includes 2 adapters and 2 rubber handlebar inserts.
- Bar end sold separately

$19.99
Key features:
- Blendr works with this simple formula: Stem + Base + Mount. Add accessory.
- Bases for use with the Madone KVF Aero Integrated Bar/Stem
- Add any XXX accessory mount (sold seperately) for an elegant, integrated look

$125.99
In the race against the clock, Bontrager's Race Lite Clip-On Aerobars S-Bend give you the advantage you need. Adjustable arm rests and extensions allow you to dial in your profile position so you can comfortably stay in a wind-slicing tuck. And the internal cable routing keeps everything out of the wind, nice and neat.

$14.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 52mm lower headset bearings
- Compatible with 30mm (1-1/8") straight steerer tubes
- Durable steel construction
- Allows the installation of a straight steerer fork without changing out the headset lower

$34.99
Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.

$108.00
All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove.
The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life.
During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother.
- Inner Diameter: 15mm
- Outer Diameter: 24mm
- Width: 5mm

$41.99
- Clamps to a threadless steerer, offers up to 3-1/4" stem height increase
- Forged 6061 aluminum
- Threaded alloy top cap

$45.99
- Clamps to a threadless steerer
- Offers up to 4-1/2" stem height increase
- Forged 6061-aluminum provides extra strength
- Machined aluminum top cap is threaded, providing easy installation

$10.99 - $16.99
Electra's Townie Quick-Release Seatpost Collar offers a little extra bling and convenience to your Townie bike because it allows no-tools seat-height adjustment. This quality metal clamp is easy to install and use and it securely fastens your seatpost in place.
$31.99
Get back on the road with a genuine replacement chainguard.
- Original equipment replacement chainguards for Electra Cruiser 1 bikes
- Color matched for direct compatibility

$31.99
Get back on the road with a genuine replacement chainguard.
- Paint matched for direct compatibility
- Mounting hardware not included

$31.99
Genuine replacement parts
The chainguard you need.
Get back on the road with a genuine replacement chainguard.
- Original replacement chainguard for Electra Townie bikes
- Color matched for direct compatibility

$36.99
Get back on the road with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear kit, 135mm Q/R
- Mounting location: Rear kit
- Attachment: 2-bolt

$36.99 - $39.99
Genuine replacement parts
Keep your bike operating as it should.
Get back on the road with a genuine replacement chainguard.
- Color matched for direct compatibility
- Full steel construction

$39.99
Genuine replacement parts
The chainguard you need.
Get back on the road with a genuine replacement chainguard.
- Original replacement chainguard
- Color matched for direct compatibility
Page 1 of 7
Next page