Tools

Set includes 6 pcs of arm for inner bearing dimensions 6.5-8,10-12, 12-15, 17-20, 22-28, 30-36 Used for pulling different types of bearings. The bearing is gripped from the inside side and pulled out.

- Crank Saver—Pedal thread repair and insert kit - Includes: left and right reaming tap 5/8x24 TPI, 10 pedal thread inserts for left crank arm, 10 pedal thread inserts for right crank arm, metal box with cut out SOS foam trays.

- For fixing bottom bracket threads on the frame or removes excess paint or dirt from threads - BSA standard - left & right thread tap 1.3/8 × 24 TPI - Includes: Reamer’s magnetic handle 1695.1/4BI or 1695.1/4BIUS, Reamer holder for 1697.2/4, Left & right tap BSA 1.3/8 × 24 TPI

- Torque wrench specially designed for work on bikes - Smaller version features a 1/4'' square drive and will allow you to work on even the most hidden bolts with low torque values. Bigger version features 1/2'' square drive and will accept all our bottom bracket sockets, suspension top cap sockets and cassette lock rings without any adaptors. - Target torque warning: buzzer + 2 LED lights - Unit selection: N-m, in-lb, ft-lb, kg-c - Battery: 1×AAA (not included), compatible with rechargeable battery

- Torque wrench specially designed for work on bikes - Smaller version features a 1/4'' square drive and will allow you to work on even the most hidden bolts with low torque values. Bigger version features 1/2'' square drive and will accept all our bottom bracket sockets, suspension top cap sockets and cassette lock rings without any adaptors. - Target torque warning: buzzer + 2 LED lights - Unit selection: N-m, in-lb, ft-lb, kg-c - Battery: 1×AAA (not included), compatible with rechargeable battery

- Includes drifts for most common bearing sizes - Organized storage in a plastic case with our laser-cut SOS foam tray - Combine with our Bearing Puller for the best bearing service kit in the business

These taps are designed to work with our 1697 BSA BB tap set or our 1698 Italian BB tap set. If you have one or the other and need compatibility with the other type of thread, simply buy these taps and the corresponding tap holders and you'll be on your way.

The Modular T-Handle Kit provides an unparalleled combination of portability and functionality in a complete Hex and Torx wrench set. With removable lateral bars, mechanics can mix and match the driver sizes, plus tuck the entire kit into the most compact tool roll available. The multifunctional roll integrates with our Team Edition case or hangs from a pegboard. Features - Set of 10, color coded Hex and Torx wrenches in a compact roll: 7 Hex: 2, 2.5, 3, 4, 5, 6, 8/10mm. 3 Torx: T10, T25, T30. - Precision CNC machined tool bodies. - Compact length allows for lighter weight, portability, and appropriate torque applications for bicycles. - Knurled spinner sleeves on each wrench for convenient and fast driving/removal of fasteners. - 3mm and 5mm machined tapered ends for deep set hardware access. - 3-position sliding lateral bars – sliding allows for easier fit into hard-to-reach places. - Lateral bars can be completely removed for pen drive applications in tight spots and for compact storage. - Lateral bars and drivers can be swapped and combined to customize the set. - Tool roll included – highly compact for portability. - Adjustable G-hook closure for secure storage. - Tool roll is compatible with the Team Edition case – includes Velcro to secure to case. - Tool roll includes grommets to allow peg wall hanging.

This tool accurately presses headset cups 1”, 1-1/8”, 1-1/4 ” and 1-1/2” into head tubes. In addition it has a longer spindle for BMX headsets with larger tubing. This precision made tool enables work without damage.

Torq Stick Torque Wrech - Pull & rotate to select your target torque value - Audible signal: Torque wrench clicks when preset torque is reached - Storage pen integrated with tool holder snaps to hold the Ratchet Stick together for riding or storage - Turn the ratchet wheel to tighten or loosen mounting bolt - 3, 4, 5 Allen bits, T20, T25 Torx bits included - Material: aluminum and engineering grade polymer body, hardened steel ratchet, S2 hardened steel bits

- Incredibly compact torque wrench with adjustable range from 2-10Nm - Reversible ratcheting head - Includes a 5 bit storage compartment that attaches to the wrench for storage - Also includes the following hex bits 3 4 5 and T20 and T25 Torx bits - P

No more need to hold wheels between your knees, balance on a bench top or ask for help. The WH-1 Wheel Holder firmly holds thru axle and quick release wheels at three convenient positions. It’s like having a strong helper to hold wheels during cleaning, tire and tube work, hub work, cassette work, and tubeless installation. The WH-1 can be bolted or clamped directly to a bench or installed in a bench vise. Uses and Features: - Quick and easy access to hold virtually any wheel to perfectly position your work for a variety of tasks including but not limited to: - Wheel building -Cassette removal and installation - Tire and tube removal and installation - Tubeless tire work - General cleaning - Hub work - Holds wheel at vertical, 35 degrees from vertical, and horizontal positions - Accepts 12, 15, and 20mm thru axles and 5mm skewers - E-Nickel finish for durability

The CRS-15.2 uses two different insert rings to install bearing races on the 1.5-inch and 1-1/4-inch forks. The bearing surface is spared a direct hit by using aluminum inserts. Using a hammer, tap firmly on the end cap of the tube and seat the race into its proper place safely and accurately. Included extension allows work on fork steering tubes up to 425mm. - SHIS terminology: The CRS-15 services crown races in SHIS 33 and 40.

- Foldable and precise tool, used for re-aligning rear derailleur hangers and maintaining precise gear shifting - Compatible with all wheel sizes from 20? to 29?+ and screws directly into rear derailleur hanger threads - Precise measuring gauge can be locked in place, so you don´t lose you measurement when you push it against the wheel in different positions

A daily-use, shop version of Park Tool's world-famous CM-5.2 Chain Scrubber. The CM-25 features a super-tough die-cast aluminum case and handle, plus a unique brush/sponge replacement cartridge that makes it easy to keep it running smoothly and working properly. Park Tool's proven four-sided scrubbing action makes thoroughly cleaning chains quick and easy. A shop quality cleaner built to give years of constant use. - Proven chain scrubbing technology leaves chains sparkling clean - Durable A380 aluminum die cast case and removable handle - Dual-sided sponges and wicking pads to help reduce drips - Rotating brushes clean on all four sides of every link - Brush and sponge cartridge quickly and easily clicks in and out (RBS-25) - Locking cover with stainless steel hinge pins - Choose drip or immersion fluid application methods - 100% serviceable

- 1/4" drive torque wrench (3-15Nm) and bit sockets - Sockets include: 3/4/5/6/8mm hex, T25, and 90mm extension bar

The Range Click Torque Wrench replaces its predecessor with solid, tactile click-torque function, a wide measurement range, user-friendly ergonomics, and shop-quality fit and finish. With 13, high precision S2 tool steel bits and a protective, compact, and weather resistant TPU fold up style case, this tool is a perfect companion for safe, secure repairs in the shop or on the go. - Torque wrench handle features magnetic, 72-tooth ratchet, dual-sided torque setting window, dual-direction torque measurement compatible for right- and left-hand threaded bolts - 13 bits included: 2, 2.5, 3, 4, 5, 6, 8mm hex, T10, T25, T30 Torx, and 4, 5mm, Torx T25 (extended 50mm length) - Torque measurement from 2-14Nm, adjustable in 0.17Nm increments, scale displayed in 1Nm increments - Dual-sided window display scale allows easier ambidextrous usability and permits larger, easier to read torque setting numbers - Accurate within +/- 4% for 4,000 cycles - Plastic-free head and handle. PFAS-free tool roll. Plastic-free, 80% recycled paperboard packaging

In-bike storage and essential riding tools that can meet the needs of almost any trailside repair. Durable, flexible storage sleeves make for a secure, clean place to stow EnCase System tools or other small items. Fits most mountain bars and most road bars thanks to a storage sleeve with a customizable rubber flap that can be cut to meet your handlebar inner diameter. - 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx) - Magnets & O-rings keep all parts in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar when ball detent swivel head is bent for extra torque - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (included) - Magnet on bottom end of tool allows for storage on steel bike stands (or refrigerators) - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops) - Chain & Tire Plug tool compatible with all bicycle chains including 12-speed - Inserter tool and bacon strips plug holes in tubeless tires - Five strips included; refills available - Hardened steel pin for lifetime durability - Requires 4mm hex for chain tool driver which can be found on the EnCase Hex Bit Wrench - Storage sleeves made of vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Includes Drop Bar Fit Kit to customize fit for larger-diameter road handlebars

- Designed for precise torque and to prevent carbon fiber component damage - 1/4" drive torque wrench with chromoly ratchet head - Chrome plated chrome vanadium Hex and Torx bits (Hex: 2,2.5,3,4,5,6mm Torx: T10,T25,T30) - 100mm extension bar included

For dimensions: 1", 1-1/4", 1-1/8", 1-1/2" Enables fast and precise determination of steering tube length desired after the cut

- Accuracy: 0.02mm/0.001" - Measuring speed:1.5m/sec - Made according to standard DIN 862 - Dual scale in inch and mm

Compatible with chains from 6–12-speeds. Including: SRAM AXS flat top chain, Campagnolo 11- and 12-speed chain peening, and most single speed 1/8'' chains Includes: Long and short derailleur chain support, dedicated SRAM AXS chain support, Campagnolo chain pin blocker, replacement chain pin

- Set contains 9 CrMo wrenches with satin chrome finish plus ABS T-handles - 25 degree angle entry offers easy access, even in tight spaces - Set includes: 2mm—150 x 60mm, 2.5mm—150 x 60mm, 3mm—150 x 60mm, 4mm—150 x 60mm, 5mm—200 x 75mm, 6mm—200 x 75mm, 8mm—200 x 78mm, 10mm—200 x 78mm, T25—150 x 60mm

"Take the guesswork out of internal routing. The IR-1.3 speeds the installation of internally-routed cable, housing, electronic wiring and hydraulic hose into carbon fiber, titanium, and aluminum frames. The straightforward guide magnet system utilizes five long guide cables with unique fittings, which can be routed through the frame in a number of ways using the included guide magnet. Everything is neatly stored in a convenient compact case. A true time and frustration saver!??Includes five 188 cm (74"") guide cables with attached magnets and unique fittings: • Barbed adapter — Threads into the end of brake & shift cable housing as well as hydraulic brake hose • Rubber adapter — Securely holds electronic shifting wire such as Shimano® Di2, SRAM® RED® eTAP®, FSA® K-Force® WE®, and Campagnolo® EPS • Di2®-specific adapter — Specially-designed connector clips into the end of Shimano® E-tube® Di2® shift wire, and is perfectly sized to fit into frame holes as small as 6 mm • Di2® EW-SD300-specific adapter — Specially-designed connector clips into the end of Shimano® E-tube® Di2® EW-SD300 shift wire • Reverse-polarity magnet — Used in conjunction with any of the other guide cables - feeds into the opposite end and meets the leading cable in the middle, aiding in routing on frames with tricky interior shapes Also included: • Double-threaded barb — Securely attaches new housing or hydraulic hose to existing housing or hose, allowing for easy replacement without redoing the routing • Guide magnet — routes guide cables through the frame from the outside"

Rims generally need to be centered over the hub*. Our dishing gauge allows you to verify that it is, and if it's not, tells you how far out it is. The donuts on either end allow you to use the tool with a tire mounted on the rim. Fit wheels from 16" to 29" *Some rim & hub combinations, on some bikes, are purposely dished to one side. It's rare, and if it's something you need to be concerned about you're likely already aware of it.

Onboard mechanic. For rapid repairs, the STASH system holds a quick-draw Cannondale 10-in-1 mini tool, CO2 inflator spacer and tire plug kit beneath the water bottle. Where it thrives: On the bike, challenging trails What it's built for: Versatility, convenience Highlights: - Fastest access to tools during riding or racing - Compatible with 2021+ Scalpel - Includes holder, Dynaplug, multi-tool and CO2 spacer

For use in conjunction with our reaming pedal taps, this thread insert is held in place with a strong thread locker and allows you to install any standard pedal. - Pack of 10, fits 9/16" pedals.

A micro-sized tubeless tire repair and inflation kit featuring an advanced 2-in-1 CO2 injector head that repairs a puncture and inflates the tubeless tire in one step with massive air or can simply be used as a traditional CO2 inflator via the valve stem. The inflator head is compatible with both Presta and Schrader valves and the included mounting strap attaches to seatposts, saddle rails, or frame tubes and can carry one or two threaded 25g CO2 cartridges.

When a flat strikes, this organized kit will get you rolling in no time. Kit Includes: - Control Blast 0 Inflator Head - Mtb Kit: (65067) 2, 25G Threaded Co2 Cartridge - Road Kit: (65066)2, 16G Threaded Co2 Cartridge - Ratchet System Multi-Tool (2, 2.5, 3, 4, 5 ,6Mm Hex, T10, T25 Torx And Flathead) - Giant tire levers

- Designed to weigh bicycles, backpacks and other outdoor sports equipment - Design enables scale to be clamped into a bicycle repair stand or hung from the ceiling with the top loop - 10g (0.02 lb) display resolution with a 25kg (55 lb) maximum capacity and 50g minimum capacity - Easy to read LCD display with a shock-resistant housing and vinyl coated hook - Zero/Tare function, kg/lb selection, auto shut-off saves power - Four AAA batteries included

Introducing the first everyday carry, ride-ready tool kit from Feedback Sports. Featuring a compact, modular ratcheting handle, 25mm extension socket, 5Nm click-torque extension socket, and ten of the most commonly used bits, this mini ratcheting wrench kit is made for making safe and secure mid-ride repairs. The included padded case is ideal for carrying in a jersey pocket, travel kit, or keeping with you at all times, for any occasion. Features: - Kit includes ratchet handle, 25mm extension, 5Nm click-torque extension, and 10 bits. - Ratchet wrench for speed; torque extension for precision. - Portable and light – easily fits in a jersey pocket, ride pack or travel kit. - 5Nm click-torque extension for safe, precise, and secure tightening of sensitive parts. - 2-way ratchet wrench can be used without torque extension for rapid fastener take-up and loosening. - Bit extender can be used in "T" handle, "L" handle, or "I" handle (in-line) configuration to suit any task. - 6-degree ratchet engagement maneuvers in tight spaces. - Compact head and bit design allows clearance and full function in tight spaces. - 10 labeled S2 Steel bits covering the most common bicycle applications. - S2 Steel is an industry-leading tool steel made for precise edges, exact fitment, and durable working surfaces. - Hex: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm; Torx®: T10 , T25, T30; Flat: 3mm.

Unior, Bracket Socket T47, Bottom Bracket Tool, T47, PF30 Precision CNC machined 1/2'' square drive makes it easy to use with torque wrenches, ratchets and fixed handles

When a mechanical problem has you feeling lost in space, the Alien II is the extraterrestrial that will ensure you don't have to phone home. Its molded-plastic body provides an excellent gripping surface and splits in two with a press of a button. Tools include: 2, 2.5, 3, 4, 5, 6, 8 and 10mm Allen wrenches; 8, 9, 10mm box wrenches; Phillips and regular screwdrivers; a universal chain tool; 14- and 15-gauge spoke wrenches; a stainless-steel knife; a T25 Torx wrench for disc brakes; and a compartment for 2 chain pins. There's even a handy bottle opener for after the ride.

Two easily accessible hidden compact tool kits housed in your handlebar ends. The perfect tool companion for your road bike. The kit comes with of 1.5mm plug insertion tool for tubeless tire repair and a set of 4, 5, 6 , 10mm Allen bits for bike maintenance. - Tubeless tire repair kit:1.5mm plug insertion tool, 3 pieces of 1.5mm x 50mm tire repair plugs - Materials: Hardened steel, and engineering grade polymer - 55.6 g / 1.96 oz (tool kit), 19 g / 0.67 oz (repair kit) - Limitations: handlebar ends with minimum 86mm straight section ID range ø18 - ø21.2 mm

- Includes everything for a quick fix while on or off-road - Giant seat bag - 12 glueless patches - 2 tire levers - Mini pump - 9 function multi-tool

If you've got a tire that just won't seat don't risk blowing up the rim or tire by pumping it higher and higher, just reach for the handy Unior 1601 Tire Seating Pliers and give that tire a little pull in the right direction. Based off the Unior 447/1 pliers, these have steel plates welded on to the jaws to help massage the tire into place. The jaw slider has 7 indexed positions to help get just the right width for the tire you're trying to seat; and a forged, hardened chrome vanadium construction means the tool will outlast pretty much everything. 80mm max opening.

Park Tool's Bottom Bracket Bearing Tool Set removes and installs (with a bearing press which is sold separately) BB86, BB90, BB92 and Press Fit bottom brackets from Shimano, Race Face, SRAM and others that use a nominal 24mm-diameter spindle. This tool has a bearing remover that fits inside the bottom bracket shell and into the bearing so the bearings can be tapped out of the frame with a hammer. The set also includes two bushings that you use in conjunction with a bearing press for precision bearing installation (bearing press sold separately).

- Engineering grade polymer storage box. - Chromium-vanadium steel tool body. - Hex & torx wrench set: 2, 2.5, 3, 4, 5, 6, And 8mm hex along with T25 and flat-head screwdriver Chain tool. - Valve core tool. - Spoke wrench.

- Includes everything for a quick fix while on or off-road - Giant seat bag - 12 glueless patches - 2 tire levers - Mini pump - 9 function multi-tool

- Everything you need for a quick fix on the road - 3 tire levers - Patch Kit - 9-function multi-tool - CO2 inflator with 2 16g CO2 cartridges - Seat bag

The double threaded screw enables you to use this tool for Shimano standard bottom brackets as well as for Shimano Octalink and Truvativ bottom brackets.

The Adjustable Pliers Wrench is a multipurpose wrench for a multitude of tasks on any bike. Parallel-clamping, slip-lock jaws fit any nut up to 1-1/4 in (35mm) for quick work on traditional fasteners. In action, the user’s grip clamp force helps prevent the tool from camming off and rounding the edges of wrench flats the way a traditional box-end wrench can do. Plus, the adjustable size makes this one tool a suitable replacement for a full set of box end wrenches. The compact size accommodates precision work in tight spaces and will compliment professional-grade portable kits and DIY home workshops alike. Features: - Compact 7in (180mm) forged steel body with double dipped, rubber textured grip. - 2-Sided laser etched metric scale helps demarcate clamp opening and determine fastener size. - Functional jaw opening range of 0-1.25in (0-35mm) covers the majority of bicycle hardware. - Replaces an entire set of Metric and SAE wrenches and sockets up to 1-1/4in (35mm) - saving space in travel and home kits. - Spring-loaded push button allows fast, slip lock adjustment of jaw opening. - Smooth surface, non-marring jaws prevent damage to surfaces. - Durable, 45 HRC jaw hardness for a long service life. - Ideal hand tool to complete professional grade portable kits and DIY home workshops alike. - Effective in use on fork top caps, brake bleed ports, axle nuts, pedals, and more.

A fast and convenient tool to remove and install 12-spline Shimano/SRAM style cassette lockrings, as well as similar lockrings on rotor discs. The FR-5H features a modified FR-5 tool that allows use without removing most quick release skewer nuts. The removable, threaded steel handle makes it possible to replace a worn or damaged head. - Fits Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and other cassette lockrings - Also fits some Shimano disc brake lockrings

Precise design and hardened to stay sharp. 1695.1 is used to restore existing pedal threads and is available in set (left and right).

Professional wheel centering stand arm can get out of center after being used frequently. Controlling caliper arm enables us, to calibrate the stand arm back to its center position.

- The simple tightening of the spindle fits the chain pin with perfect precision and with its ergonomic design it is easy to use.

Topeak's Rocket Ratchet features a fine tooth ratchet mechanism with reverse lever and thumb wheel for quick rotation and control in tight spots and includes hardened steel tools in 2, 2.5, 3, 4, 5, 6 and 8mm hex, T10, T25 Torx and #2 Phillips bits, 2 plastic tire levers and magnetic bit holder. It's everything you need in a compact, lightweight package.

- Engineering grade polymer storage box. - Chromium-vanadium steel tool body. - Hex & torx wrench set: 2, 2.5, 3, 4, 5, 6, And 8mm hex along with T25 and flat-head screwdriver.

- Hex wrenches 2, 2.5, 3, 4, 5, 6, 8 - TX wrenches 10, 25 - PH1 screwdriver - Chain tool - Schrader & Presta valve tool - Flat screwdriver 1.0 x 5.0 - Spoke Key 3.3, 3.45 and DT

Because you love your bikes, when you’re not riding them you’re washing them, tuning them, or traveling to the ultimate ride destination. The Chain Keeper is the perfect solution to keeping your bike chain secure for bike washing, tune-ups and traveling. The elegant CNC machined design fits standard quick-release or 12mm thru-axle dropout systems, no tools required. By keeping chain tension with the Chain Keeper, you can be confident your bike is safe during drivetrain cleaning or travel. - Protects rear derailleur by maintaining chain tension when the rear wheel is removed - Ideal bike service tool for washing, tune-ups and traveling - Accommodates road bikes, cyclocross bikes, mountain bikes, electric bikes, fitness bikes and more - Fits standard 9mm Quick-Release style dropouts - Fits 12mm Thru-Axle dropouts - Prevents the chain from slapping against delicate and painted frame surfaces - High-density Delrin roller is easy on your chain, yet incredibly durable - CNC machined aluminum body is corrosion-resistant and comfortable in-hand - Tool-free, single-hand design makes use simple and effective for beginner or professional bike mechanics

Park’s Professional Cable And Housing Cutter is specifically for use on derailleur and brake cables and housing. It even makes quick work of hard-to-cut shift-cable housing. Its cold-forged, heat-treated-steel handles won't bend and its precision-ground jaws cut perfectly every time. Its dual-density molded grips are specially contoured for superior comfort and control. Plus, there’s a built-in cable-end crimper and a forming hole for reforming housing ends.

Never leave safety behind. Topeak's Mini 18+ folding tool lets you take it all with you without weighing you down. Its forged-aluminum body holds 18 tools including: 2, 2.5, 3, 4, 5, 6, 8 and 10mm Allen wrenches, a T25 Torx wrench, 14- and 15-gauge spoke wrenches, a cast-chromoly chain tool, aluminum tire lever, Phillips and flat-blade screwdrivers, and a bottle opener.

- 3/32" chain whip

- Pliers developed specially for cutting shift and break housing. Pliers cut precise and smooth without deformation to the cable housing and feature a build in crimping function for cable end caps. - In order to preserve the ultimate cutting performance, we highly advice not to use pliers for cutting shift/brake wires and spokes.

- Hex wrenches 2, 2.5, 3, 4, 5, 6, 8 - TX wrenches 10, 25 - PH1 screwdriver - Chain tool - Schrader & Presta valve tool

Topeak's Hexus X is an award-winning, 21-function multi-tool with updated design to store T15, T25, and 8mm hex tool bits inside. Tire levers are securely side-mounted, and have additional tools built into them. The Hexus X is an excellent choice for both road and mountain bike riders. - Allen wrenches: 2 / 2.5 / 3 / 4 (2 pcs) / 5 / 6 / 8mm - Torx bits: T15 / T25 / T30 - #2 Phillips screwdriver - 14G / 15G spoke wrenches - 2 engineering grade plastic tire levers - Presta Valve Core Tool - Chromoly steel chain tool - Steel wire chain hook - Weight: 170g *Chain tool is compatible with single and multi-speed chains up to 12-speed except Campagnolo 11-speed hollow-pin chains

Wrench for rear sprocket with handle is used for Shimano®, SRAM®, Sun Race®, Suntour® and other cassette sprockets.

Park's Bottom Bracket Bearing Tool Set removes and installs (with a bearing press, which is sold separately) BB30, PF30, EVO 386 and BBright bottom bracket bearings. This fine tool slides through the bottom bracket shell and into the bearings so the bearings can be tapped out with a hammer. Two bushings for installing BB30 and PF30 bearings from SRAM and FSA are included (press required and sold separately).

Park Tool's Utility Pick Set is a set of three unique, multi-purpose picks ideal for a wide variety of detail work. Features: • Aluminum handle with magnet • Picks are replaceable, cold formed, heat treated and polished high carbon steel • Set includes 1-straight, 1-hook and 1-90 degree pick

- CNC side panels with a lightweight, easy to carry, ultra-compact design - 8mm hex bit combines easily with 5mm allen wrench - Independent valve core tool - CO2 inflator tool - Tools: 2, 2.5, 3, 4, 5, 6, 8mm Hex, PH2, T25, SL5, Valve Core Tool, CO2 inflator - Sizes: 88 x 54 x 8mm (TBC) - Weight: 114g